From 07503b5285f377feceb517e6c6e59ed7bd288f88 Mon Sep 17 00:00:00 2001 From: Roel Date: Wed, 15 Apr 2015 13:50:14 +0200 Subject: [PATCH] added information for how lazyinstall works --- lazyinstall/README.md | 16 ++++++++++++++++ lazyinstall/wireless | 4 ++-- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/lazyinstall/README.md b/lazyinstall/README.md index 717b886..6ff2707 100644 --- a/lazyinstall/README.md +++ b/lazyinstall/README.md @@ -1,3 +1,19 @@ This is a very primitive script to automate the openwrt setup. It's probably best not used at this point. +However if you choose to use it make sure you have the following things set up: + +- The OpenWRT router has a connection to the internet (by attaching it to another router via ethernet) +- You have a properly formatted usb drive (one ext4 partition, one 32mb swap partiton) +- Make sure the usb flash drive is inserted in the router + +The lazy install scripts works by moving config files from this folder to replace the ones on the target router's filesystem. +Therefore you need to edit the following files to suit your own needs: + +network file: +lines 11 and 13, the ip adress you want to use plus the ip adress of the gateway that provides this router with its internet connection. + +wireless file: +line 11,the wireless SSID that the router will get + + diff --git a/lazyinstall/wireless b/lazyinstall/wireless index 5729520..23709bb 100644 --- a/lazyinstall/wireless +++ b/lazyinstall/wireless @@ -7,9 +7,9 @@ config wifi-iface 'wmesh' option bssid '66:66:66:66:66:66' config wifi-iface - option 'device' 'radio0' #use your excisting wifi device, look in the list above. + option 'device' 'radio0' #use your existing wifi device, look in the list above. option 'ssid' 'meshenger_node' #use a unique name for your network? option 'network' 'hotspot' option 'mode' 'ap' option 'encryption' 'none' - option 'isolate' '1' \ No newline at end of file + option 'isolate' '1'