From 0bc692f444e16dbf507ee1d593a9040f3511b5df Mon Sep 17 00:00:00 2001 From: Roel Date: Thu, 17 Apr 2014 23:19:33 +0200 Subject: [PATCH] added wireless configuration info --- README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 93858bd..eebb0b1 100644 --- a/README.md +++ b/README.md @@ -20,7 +20,7 @@ We have used the following models: TP-Link MR-3020, TP-Link TP-WR703n and TP-WR Open-WRT have a guide for each supported device that tells how to best flash your specific device with Open-WRT. [(Article on flashing)](http://wiki.openwrt.org/doc/howto/generic.flashing) -After flashing proceed through the first login as described [(here)](http://wiki.openwrt.org/doc/howto/firstlogin) +After flashing proceed through the first login as described [here.](http://wiki.openwrt.org/doc/howto/firstlogin) You are going to need to have an internet connection to your router, the easiest thing is to hook it up to the router. @@ -90,7 +90,7 @@ config mount ``` ### Wireless configuration -The next section is on how to set up the network interfaces to work with B.A.T.M.A.N the mesh networking protocol. It is more or less a summary of what's written [(here)](http://www.open-mesh.org/projects/batman-adv/wiki/Batman-adv-openwrt-config) +The next section is on how to set up the network interfaces to work with B.A.T.M.A.N the mesh networking protocol. It is more or less a summary of what's written [here.](http://www.open-mesh.org/projects/batman-adv/wiki/Batman-adv-openwrt-config) `$ vi etc/config/wireless` and edit the wireless interface to look like this: