@ -15,11 +15,11 @@ The exhibition will start on October 26th in the public space in front of Zentru
Now do it yourself!
## hardware
In this repo you will find a 3d printable .stl file that will allow you to print a mould for vacuumforming the charging pad cover.
In this Archive you will find a 3d printable .stl file that will allow you to print a mould for vacuumforming the charging pad cover.
## software
In this repo you will find an arduino sketch for the ESP8266 wireless chip.
In this Archive you will find an arduino sketch for the ESP8266 wireless chip.
### prerequisites
@ -56,6 +56,11 @@ For ESP12F use the following settings in Arduino IDE
These settings give you about 2.471 KB of SPIFFS storage space for files and ~512KB sketch size
### Uploading Data to SPIFFS
The website served on the ESP8266 lives in the 'data' folder inside the sketchyour sketch. To upload this data you need the 'Arduino ESP8266 filesystem uploader' plugin. Find it [here](https://github.com/esp8266/arduino-esp8266fs-plugin).
You will find the tool/function in Arduino > Tools > ESP8266 Sketch Data Upload (make sure the directory path is correct). Close the Serial Monitor prior to uploading data.
