some aesthetic changes

This commit is contained in:
then 2020-10-30 22:19:55 +01:00
parent 57d6729494
commit 364497cc7e

View File

@ -20,7 +20,7 @@
If you have soldered all components together and your ESP12f won't boot, you might have to modifiy your charging coil+circuit a bit. To make sure it's the coild, measure the output of the coils electronics on the + and - (gnd) terminals. If your multimeter reads ~2.5 volts you need to modify the circuit. (Disclaimer: the exact details on how this circuit works are yet unclear, comparing to a working coil revealed several differences in the electronics, matching them up made the non working coil output the needed 5v).
#### Step 1
##### Step 1
Take off the follwing chips indicated by the following silkscreen codes:
* Q3 (chip markings: p7)