Browse Source

some aesthetic changes

master
then 4 years ago
parent
commit
364497cc7e
  1. 2
      electronics/README.md

2
electronics/README.md

@ -20,7 +20,7 @@
If you have soldered all components together and your ESP12f won't boot, you might have to modifiy your charging coil+circuit a bit. To make sure it's the coild, measure the output of the coils electronics on the + and - (gnd) terminals. If your multimeter reads ~2.5 volts you need to modify the circuit. (Disclaimer: the exact details on how this circuit works are yet unclear, comparing to a working coil revealed several differences in the electronics, matching them up made the non working coil output the needed 5v). If you have soldered all components together and your ESP12f won't boot, you might have to modifiy your charging coil+circuit a bit. To make sure it's the coild, measure the output of the coils electronics on the + and - (gnd) terminals. If your multimeter reads ~2.5 volts you need to modify the circuit. (Disclaimer: the exact details on how this circuit works are yet unclear, comparing to a working coil revealed several differences in the electronics, matching them up made the non working coil output the needed 5v).
#### Step 1 ##### Step 1
Take off the follwing chips indicated by the following silkscreen codes: Take off the follwing chips indicated by the following silkscreen codes:
* Q3 (chip markings: p7) * Q3 (chip markings: p7)

Loading…
Cancel
Save