some aesthetic changes

This commit is contained in:
then 2020-10-30 22:19:55 +01:00
parent 57d6729494
commit 364497cc7e

View File

@ -20,7 +20,7 @@
If you have soldered all components together and your ESP12f won't boot, you might have to modifiy your charging coil+circuit a bit. To make sure it's the coild, measure the output of the coils electronics on the + and - (gnd) terminals. If your multimeter reads ~2.5 volts you need to modify the circuit. (Disclaimer: the exact details on how this circuit works are yet unclear, comparing to a working coil revealed several differences in the electronics, matching them up made the non working coil output the needed 5v). If you have soldered all components together and your ESP12f won't boot, you might have to modifiy your charging coil+circuit a bit. To make sure it's the coild, measure the output of the coils electronics on the + and - (gnd) terminals. If your multimeter reads ~2.5 volts you need to modify the circuit. (Disclaimer: the exact details on how this circuit works are yet unclear, comparing to a working coil revealed several differences in the electronics, matching them up made the non working coil output the needed 5v).
#### Step 1 ##### Step 1
Take off the follwing chips indicated by the following silkscreen codes: Take off the follwing chips indicated by the following silkscreen codes:
* Q3 (chip markings: p7) * Q3 (chip markings: p7)