Merge branch 'master' of https://git.vvvvvvaria.org/then/opencoil-paracity

README.md

@@ -1,6 +1,5 @@
 # opencoil-paracity
+Repo for non destructive e-scooter intervention materials.
 
 ![picture](https://git.vvvvvvaria.org/then/opencoil-paracity/raw/branch/master/graphics/charging-pad/pad-exploded-view-ani.gif)
 
-
-Repo for non destructive e-scooter intervention materials

adaptor/README.md

@@ -0,0 +1,12 @@
+# opencoil-paracity: adaptor
+
+
+
+![picture](https://git.vvvvvvaria.org/then/opencoil-paracity/raw/branch/master/adaptor/adaptor-with-electronics.jpg)
+
+*PCB inside educational model for possible adaptor platform, power your own devices!*
+
+
+![picture](https://git.vvvvvvaria.org/then/opencoil-paracity/raw/branch/master/adaptor/adaptor-cnc-addon.gif)
+
+*CNC adaptopr plate for mounting your own devices*

code/esp8266/README.md

@@ -0,0 +1,45 @@
+# opencoil-paracity: code
+
+### Prerequisites
+
+This guide assumes you have a 4MB ESP12F microcontroller and use Arduino IDE.
+
+* Board Manager: You will need to add the support for this board to your IDE (Arduino in this case), see: https://github.com/esp8266/Arduino
+* SPIFFS: You will need to add SPIFFS file upload support to Arduino if you want to upload files to the ESP12F, see: https://github.com/esp8266/arduino-esp8266fs-plugin
+
+
+
+### Uploading Code
+For ESP12F use the following settings in Arduino IDE
+
+* Board: Generic ESP8266 Module
+* Builtin Led: 2
+* Upload Speed: 921600
+* CPU Frequency: 80 MHz
+* Crystal Frequency: 26MHz
+* Flash Size: 4MB (FS:3MB OTA: ~512KB) 
+* Flash Mode: DOUT
+* Flash Frequency: 40MHz
+* Reset Method: dtr (aka nodemcu)
+* Debug port: Disabled
+* Debug Level: none
+* LwIP Variant: v2 Lower Memory
+* VTables: Flash
+* Exceptions: Legacy (new can return nullptr)
+* Erase Flash: depends on if you want to change SSID, Files, or only Sketch
+* Espressif FW: nonos-sdk 2.2.1+100 (190703)
+* SSL Support: All SSL ciphers (most compatible)
+* Port: depend if u are uploading Over The Air, or using a cable
+* Programmer: AVRISP mkII
+
+
+These settings give you about 2.471 KB of SPIFFS storage space for files and ~512KB sketch size
+
+
+### Over The Air (OTA) Uploading 
+
+* Connect to the hotspot created by the ESP12F.
+* Launch Arduino, choose "esp at 192.168.4.1" as the port. 
+* If you don't see the port listed in Arduino (Tools > Port), restart Arduino IDE.
+
+You can upload your sketch and files wirelessly, there is one caveat: SPIFFS file uploads don't work with password protected uploads (line 42). Workaround: flash your sketch with line 42 commented out. Upload your files to SPIFFS, then uncomment the line and Upload the code.

electronics/README.md

@@ -0,0 +1,14 @@
+# opencoil-paracity: electronics
+
+
+
+![picture](https://git.vvvvvvaria.org/then/opencoil-paracity/raw/branch/master/electronics/esp-wireless-charging-pcb/pcb-ass.jpg)
+
+*Assembled pcb*
+
+### Bill of Materials 
+
+* PCB: Send the gerbers from this repo to your fab of choice.
+* ESP12F: Widely available.
+* AM1117 3.3v Regulator: Widely available.
+* QI compatible wireless charging coil delivering 5v and > [500 mA](https://docs.ai-thinker.com/_media/esp8266/docs/esp-12f_product_specification_en.pdf): For example [this](https://nl.aliexpress.com/item/4001154059743.html).