then
/
opencoil-paracity
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
Browse Source

added more and more instructions for firmware flashing

master
dennisdebel 4 years ago
parent
93802b2b5d
commit
94d8921030
1 changed files with 4 additions and 2 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 6
      code/esp8266/README.md

6
code/esp8266/README.md
View File

@ -36,8 +36,10 @@ For ESP12F use the following settings in Arduino IDE
These settings give you about 2.471 KB of SPIFFS storage space for files and ~512KB sketch size These settings give you about 2.471 KB of SPIFFS storage space for files and ~512KB sketch size
### Over The Air (OTA) Uploading ### Over The Air (OTA) Uploading
* Connect to the hotspot created by the ESP12F. * Connect to the hotspot created by the ESP12F.
* Launch Arduino, choose "esp at 192.168.4.1" as the port. * Launch Arduino, choose "esp at 192.168.4.1" as the port.
* If you don't see the port listed in Arduino (Tools > Port), restart Arduino IDE. * If you don't see the port listed in Arduino (Tools > Port), restart Arduino IDE.
You can upload your sketch and files wirelessly, there is one caveat: SPIFFS file uploads don't work with password protected uploads (line 42). Workaround: flash your sketch with line 42 commented out. Upload your files to SPIFFS, then uncomment the line and Upload the code.
Write Preview
Loading…
Cancel
Save