added more and more instructions for firmware flashing

This commit is contained in:
dennisdebel 2020-10-01 22:56:07 +02:00
parent 93802b2b5d
commit 94d8921030

View File

@ -36,8 +36,10 @@ For ESP12F use the following settings in Arduino IDE
These settings give you about 2.471 KB of SPIFFS storage space for files and ~512KB sketch size These settings give you about 2.471 KB of SPIFFS storage space for files and ~512KB sketch size
### Over The Air (OTA) Uploading ### Over The Air (OTA) Uploading
* Connect to the hotspot created by the ESP12F. * Connect to the hotspot created by the ESP12F.
* Launch Arduino, choose "esp at 192.168.4.1" as the port. * Launch Arduino, choose "esp at 192.168.4.1" as the port.
* If you don't see the port listed in Arduino (Tools > Port), restart Arduino IDE. * If you don't see the port listed in Arduino (Tools > Port), restart Arduino IDE.
You can upload your sketch and files wirelessly, there is one caveat: SPIFFS file uploads don't work with password protected uploads (line 42). Workaround: flash your sketch with line 42 commented out. Upload your files to SPIFFS, then uncomment the line and Upload the code.