diff --git a/README.md b/README.md
index 34d4f68..94ab328 100644
--- a/README.md
+++ b/README.md
@@ -2,7 +2,7 @@
 
 Here you will find instructions and code to produce an audio (.wav) player using a SD card, a speaker, 3v coin-cell and an attiny(85) micro-controller. Oh yes, and your favorite tunes!
 
-[Varia Open-Day](http://varia.zone/varia-open-day.html) workshop participants, feel free to skip right ahead to the [Workshop](#Workshop) section.
+[Varia Open-Day](http://varia.zone/varia-open-day.html) workshop participants, feel free to skip right ahead to the [Workshop](https://git.vvvvvvaria.org/then/secure-digital-club#workshop) section below.
 
 ## Intro
 This repository is by no means intended as tutorial/how-to but as a personal archive of notes how to re-create the amazing work by [Elm Chan](http://elm-chan.org/)
@@ -11,7 +11,7 @@ It can and will therefore be hyper-specific, incomplete, inconsistent or plain w
 
 
 ## Flashing
-To get your micro-controller to do what you want, it needs some instructions. If you have a pre-flashed ATtiny85 micro-controller your can skip to the [Workshop](#Workshop)  part of this read-me (below).
+To get your micro-controller to do what you want, it needs some instructions. If you have a pre-flashed ATtiny85 micro-controller your can skip to the [Workshop](https://git.vvvvvvaria.org/then/secure-digital-club#workshop)  part of this read-me (below).
 
 
 #### Prerequisites
@@ -194,7 +194,7 @@ You're free to come up with a technique to connect the components together as lo
 
 2) place the ATtiny with pin1 in the top left corner on the SD card orientated in such a way that the golden contacts are displayed.
 
-3) Bent the ATtiny pins a little bit so pin 5 touches D0 on the SD card, pin 7 touches the CLK contact of the SD card and pin 8 touches the VCC on the SD card. Lift ATtiny pin 6 up a bit, so it doens't make contact.  See images (09.jpg) and (10.jpg)
+3) Bent the ATtiny pins a little bit so pin 5 touches D0 on the SD card, pin 7 touches the CLK contact of the SD card and pin 8 touches the VCC on the SD card. Lift ATtiny pin 6 up a bit, so it doens't make contact.  See images   ![09](images/09.jpg?raw=true "09") and   ![10](images/10.jpg?raw=true "10")
 
 
 4) remember the ATtiny orientation and put it aside.