From b3ddc2b60db1c1c486267cdb04c5ac126d039ca2 Mon Sep 17 00:00:00 2001 From: then Date: Fri, 11 May 2018 13:00:32 +0200 Subject: [PATCH] Update 'README.md' --- README.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index 34d4f68..94ab328 100644 --- a/README.md +++ b/README.md @@ -2,7 +2,7 @@ Here you will find instructions and code to produce an audio (.wav) player using a SD card, a speaker, 3v coin-cell and an attiny(85) micro-controller. Oh yes, and your favorite tunes! -[Varia Open-Day](http://varia.zone/varia-open-day.html) workshop participants, feel free to skip right ahead to the [Workshop](#Workshop) section. +[Varia Open-Day](http://varia.zone/varia-open-day.html) workshop participants, feel free to skip right ahead to the [Workshop](https://git.vvvvvvaria.org/then/secure-digital-club#workshop) section below. ## Intro This repository is by no means intended as tutorial/how-to but as a personal archive of notes how to re-create the amazing work by [Elm Chan](http://elm-chan.org/) @@ -11,7 +11,7 @@ It can and will therefore be hyper-specific, incomplete, inconsistent or plain w ## Flashing -To get your micro-controller to do what you want, it needs some instructions. If you have a pre-flashed ATtiny85 micro-controller your can skip to the [Workshop](#Workshop) part of this read-me (below). +To get your micro-controller to do what you want, it needs some instructions. If you have a pre-flashed ATtiny85 micro-controller your can skip to the [Workshop](https://git.vvvvvvaria.org/then/secure-digital-club#workshop) part of this read-me (below). #### Prerequisites @@ -194,7 +194,7 @@ You're free to come up with a technique to connect the components together as lo 2) place the ATtiny with pin1 in the top left corner on the SD card orientated in such a way that the golden contacts are displayed. -3) Bent the ATtiny pins a little bit so pin 5 touches D0 on the SD card, pin 7 touches the CLK contact of the SD card and pin 8 touches the VCC on the SD card. Lift ATtiny pin 6 up a bit, so it doens't make contact. See images (09.jpg) and (10.jpg) +3) Bent the ATtiny pins a little bit so pin 5 touches D0 on the SD card, pin 7 touches the CLK contact of the SD card and pin 8 touches the VCC on the SD card. Lift ATtiny pin 6 up a bit, so it doens't make contact. See images ![09](images/09.jpg?raw=true "09") and ![10](images/10.jpg?raw=true "10") 4) remember the ATtiny orientation and put it aside.