added information for how lazyinstall works

lazyinstall/README.md

@@ -1,3 +1,19 @@
 This is a very primitive script to automate the openwrt setup.
 It's probably best not used at this point.
 
+However if you choose to use it make sure you have the following things set up:
+
+- The OpenWRT router has a connection to the internet (by attaching it to another router via ethernet)
+- You have a properly formatted usb drive (one ext4 partition, one 32mb swap partiton)
+- Make sure the usb flash drive is inserted in the router
+
+The lazy install scripts works by moving config files from this folder to replace the ones on the target router's filesystem. 
+Therefore you need to edit the following files to suit your own needs:
+
+network file:
+lines 11 and 13, the ip adress you want to use plus the ip adress of the gateway that provides this router with its internet connection.
+
+wireless file:
+line 11,the wireless SSID that the router will get 
+
+

lazyinstall/wireless

@@ -7,9 +7,9 @@ config wifi-iface	'wmesh'
 	option bssid	'66:66:66:66:66:66'
 
 config wifi-iface                       
-        option 'device' 'radio0'  #use your excisting wifi device, look in the list above.    
+        option 'device' 'radio0'  #use your existing wifi device, look in the list above.    
         option 'ssid' 'meshenger_node'  #use a unique name for your network?
         option 'network' 'hotspot'      
         option 'mode' 'ap'              
         option 'encryption' 'none'
-        option 'isolate' '1'  
+        option 'isolate' '1'