@ -150,6 +150,99 @@ Make sure that you have the same version of batctl and openwrt on all nodes you
`$ uname -a && batctl -v ` to see the version information.
### Configuring / Adding a client Hotspot
For the front-end, the client user interface, we must have a captive portal running. These are the first steps in enableing another wireless interface for the hotspot
Add the following lines in the following config files and restart the network:
`$ vi /etc/config/network`
```
config interface 'hotspot'
option 'iface' 'radio0' #use your excisting wifi device (look in config/wireless below)
option 'proto' 'static'
option 'ipaddr' '192.168.2.1'
option 'netmask' '255.255.255.0'
option 'type' 'bridge'
```
`$ vi /etc/config/wireless`
```
config wifi-iface
option 'device' 'radio0' #use your excisting wifi device, look in the list above.
option 'ssid' 'meshtest1'
option 'network' 'hotspot'
option 'mode' 'ap'
option 'encryption' 'none'
option 'isolate' '1'
```
`$ vi /etc/config/dhcp`
```
config dhcp hotspot
option 'interface' 'hotspot'
option 'start' '100'
option 'limit' '150'
option 'dynamicdhcp' '1'
```
`$ vi /etc/config/firewall` enable handing out dhcp addresses to wifi clients
```
config 'zone'
option 'name' 'hotspot'
option 'input' 'ACCEPT'
option 'forward' 'ACCEPT' #was REJECT
option 'output' 'ACCEPT'
config 'rule'
option 'src' 'hotspot'
option 'dest_port' '53'
option 'proto' 'tcpudp'
option 'target' 'ACCEPT'
config 'rule'
option 'src' 'hotspot'
option 'src_port' '67-68'
option 'dest_port' '67-68'
option 'proto' 'udp'
option 'target' 'ACCEPT'
```
`$ /etc/init.d/network restart`
`$ /etc/init.d/firewall restart`
`$ /etc/init.d/dnsmasq restart`
to serve file, run uhttpd server, for example in home folder:
`$ /usr/sbin/uhttpd -f -p 8080 -h Meshenger/msg`
the website will be available at 192.168.2.1:8080 from meshtest network.
easier is to maybe use the already running uhttpd, used by luci and change the config file?
(to 'catch all' and 'forward all http' requests to correct folder) (/etc/httpd.conf or /etc/config/uhttpd)
make luci work on port 81, freeing port 80 for us (or disable luci completely)
`$ vi /etc/config/uhttpd`
`$ /etc/init.d/uhttpd restart`
this is not ideal ofcourse, but i cant get python to run on localhost port 80 and be accessible...
