47 lines
1.7 KiB
Markdown
47 lines
1.7 KiB
Markdown
This is a very primitive script to automate the openwrt setup.
|
|
It's probably best not used at this point.
|
|
|
|
However if you choose to use it make sure you have the following things set up:
|
|
|
|
- The OpenWRT router has a connection to the internet (by attaching it to another router via ethernet)
|
|
- You have a properly formatted usb drive (one ext4 partition, one 32mb swap partiton)
|
|
- Make sure the usb flash drive is inserted in the router
|
|
|
|
The lazy install scripts works by moving config files from this folder to replace the ones on the target router's filesystem.
|
|
Therefore you need to edit the following files to suit your own needs:
|
|
|
|
network file:
|
|
lines 11 and 13, the ip adress you want to use plus the ip adress of the gateway that provides this router with its internet connection.
|
|
|
|
wireless file:
|
|
line 11,the wireless SSID that the router will get
|
|
|
|
Once you've set all of this up copy the lazyinstall directory to your open-wrt router:
|
|
|
|
scp -r /path/to/meshenger/lazyinstall/ root@target.router.ip.adress:~/
|
|
|
|
ssh into the target router:
|
|
|
|
ssh root@target.router.ip.address
|
|
|
|
navigate to where you copied the lazyinstall directory:
|
|
cd ~/lazyinstall
|
|
|
|
first execute lazyinstall1, it will set up the ext_root on ths usb drive
|
|
|
|
./lazyinstall1.sh
|
|
|
|
once that's done reboot the router:
|
|
|
|
reboot -f
|
|
|
|
once it is up again, ssh back in. the router has now booted from the external usb drive. you can verify that by doing:
|
|
|
|
df -h
|
|
|
|
which should show you that rootfs is the size of your external usb drive
|
|
|
|
run lazyinstall2. this will copy all the config files, download python and git and clone the meshenger project. This can take a while.
|
|
|
|
After this is done you can reboot and you will have a fully functioning meshenger node!
|