Homebrewserver.club website https://homebrewserver.club/
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 

11 KiB

Title: Installing webserver software and publishing your website Date: 2019-01-14 Category: fundamentals Tags: server, router, introduction, lan, wan Slug: fundamentals-webserver-website Summary: How to set up a spare computer as a web server and publish your website. Author: hbsc & friends Status: published

SUPER UNDER CONSTRUCTION

TODO: add good dns registry reference

##Introduction

Ever wanted to host your own website from the comfort of your own house? Ever wondered how to achieve this? Search no further! This guide will help you with the installation of web server software, which is what allows a computer to start handling HTTP requests and serve web content in response.

Besides helping you with the installation, this guide will help you getting the right certificates, configuring your server and publishing your homebrewserved website.

The instructions on this guide were run on a Debian Stretch distribution.

##Requirements

  • A spare computer.
  • A basic understanding of the command line.
  • An ssh server and client installed
  • A registered domain name
  • Have an available power socket next to your router.
  • An ethernet cable to connect your server to the router.

Installing Apache

The Apache HTTP server is a free and open-source web server software and it has been around since 1995, being the most widely used server software in the world. Because of this, documentation is plentiful and the support community is very large, meaning that help is quite easy to get for any of your server issues.
For this reason, Apache has been selected for this guide.

There are, of course, other web server software available, the most popular of which being Nginx. Nginx, which is also free and open-source software, arrived on the scene circa 2004, and it has also become a favourite for its resource efficiency.

If you want to geek out further about the differences between Apache and Nginx, this article gives you an overview.

So, without further ado, open a terminal window and let's get started:

First, make sure you update your packages list:

$ sudo apt update

Then, install the Apache HTTP server software:

$ sudo apt install apache2

If all went well, Apache should have been started immediately after installation. To double check this, run:

$ sudo systemctl status apache2

Example output:

● apache2.service - The Apache HTTP Server
   Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset:
   Active: active (running) since Sat 2019-06-22 21:29:51 UTC; 6s ago
 Main PID: 18398 (apache2)
      CPU: 573ms
   CGroup: /system.slice/apache2.service
           ├─18398 /usr/sbin/apache2 -k start
           ├─18402 /usr/sbin/apache2 -k start
           ├─18403 /usr/sbin/apache2 -k start
           ├─18404 /usr/sbin/apache2 -k start
           ├─18405 /usr/sbin/apache2 -k start
           └─18406 /usr/sbin/apache2 -k start

Jun 22 21:29:50 supermuch systemd[1]: Starting The Apache HTTP Server...
Jun 22 21:29:51 supermuch systemd[1]: Started The Apache HTTP Server.

Configuration Time

You can find Apache's configuration files in the following location: /etc/apache2/sites-available.

The 000-default.conf file should look a little something like this:

ServerAdmin webmaster@localhost
<VirtualHost *:80>
        # The ServerName directive sets the request scheme, hostname and port that
        # the server uses to identify itself. This is used when creating
        # redirection URLs. In the context of virtual hosts, the ServerName
        # specifies what hostname must appear in the request's Host: header to
        # match this virtual host. For the default virtual host (this file) this
        # value is not decisive as it is used as a last resort host regardless.
        # However, you must set it for any further virtual host explicitly.
        # ServerName example.org

        ServerAdmin webmaster@localhost
        DocumentRoot /var/www/html

        # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
        # error, crit, alert, emerg.
        # It is also possible to configure the loglevel for particular
        # modules, e.g.
        #LogLevel info ssl:warn

        ErrorLog ${APACHE_LOG_DIR}/error.log
        CustomLog ${APACHE_LOG_DIR}/access.log combined

        # For most configuration files from conf-available/, which are
        # enabled or disabled at a global level, it is possible to
        # include a line for only one particular virtual host. For example the
        # following line enables the CGI configuration for this host only
        # after it has been globally disabled with "a2disconf".
        #Include conf-available/serve-cgi-bin.conf
</VirtualHost>

For ease of use, and in case you would like to have several websites/services running behind a single server, copy this file into another, easily identifiable one, for example, calling it something like "mydomain.conf".

$ sudo cp 000-default.conf mydomain.conf

Using your favourite text editor, uncomment the ServerName line and change it to reflect your domain name:

ServerAdmin webmaster@localhost
<VirtualHost *:80>
        # The ServerName directive sets the request scheme, hostname and port that
        # the server uses to identify itself. This is used when creating
        # redirection URLs. In the context of virtual hosts, the ServerName
        # specifies what hostname must appear in the request's Host: header to
        # match this virtual host. For the default virtual host (this file) this
        # value is not decisive as it is used as a last resort host regardless.
        # However, you must set it for any further virtual host explicitly.
        ServerName mydomain.org

        ServerAdmin webmaster@localhost
        DocumentRoot /var/www/html

        # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
        # error, crit, alert, emerg.
        # It is also possible to configure the loglevel for particular
        # modules, e.g.
        #LogLevel info ssl:warn

        ErrorLog ${APACHE_LOG_DIR}/mydomain.error.log
        CustomLog ${APACHE_LOG_DIR}/mydomain.access.log combined

        # For most configuration files from conf-available/, which are
        # enabled or disabled at a global level, it is possible to
        # include a line for only one particular virtual host. For example the
        # following line enables the CGI configuration for this host only
        # after it has been globally disabled with "a2disconf".
        #Include conf-available/serve-cgi-bin.conf
</VirtualHost>

Enable this configuration by running:

$ sudo a2ensite mydomain.org

Restart Apache to load the new configuration:

$ sudo service apache2 restart

HTTPS

HTTPS, which stands for hypertext transfer protocol secure, is an extension of the HTTP protocol. As its name suggests, it adds a layer of security to the data exchanged between client and server. By adding an encryption layer to the exchanged packets, it seeks to avoid man-in-the-middle attacks, eavesdropping, etc. While HTTP uses port 80 by default, HTTPS uses port 443.

As part of its bigger goal to "encrypt the entire Internet", the Electronic Frontier Foundation developed Certbot, a free and open source tool for automating the server-side deployment of Let's Encrypt Certificates, thus enabling HTTPS.

Let's get down to it! Again, these instructions are specific to Debian 9 (Stretch), but detailed instructions for installation on other distros can be found on Certbot's website

First, add backports to your packages list and update it:

$ echo deb http://deb.debian.org/debian stretch-backports main | sudo tee -a /etc/apt/sources.list && sudo apt update

Now, install Certbot:

$ sudo apt install certbot python-certbot-apache -t stretch-backports

Run Certbot to get the right certificates for your domain:

$ sudo certbot certonly -d myserver.org

After following the process, and if all went well, you should now see the following message:

- Congratulations! Your certificate and chain have been saved at:
   /etc/letsencrypt/live/mydomain.org/fullchain.pem
   Your key file has been saved at:
   /etc/letsencrypt/live/mydomain.org/privkey.pem
   Your cert will expire on 2019-09-24. To obtain a new or tweaked
   version of this certificate in the future, simply run certbot
   again. To non-interactively renew *all* of your certificates, run
   "certbot renew"
 - If you like Certbot, please consider supporting our work by:

   Donating to ISRG / Let's Encrypt:   https://letsencrypt.org/donate
   Donating to EFF:                    https://eff.org/donate-le

Now, it is time to edit your etc/apache2/sites-available/mydomain.conf file accordingly:

<VirtualHost *:80>
        ServerName mydomain.org

        ServerAdmin webmaster@localhost
        DocumentRoot /var/www/html

        ErrorLog ${APACHE_LOG_DIR}/mydomain.error.log
        CustomLog ${APACHE_LOG_DIR}/mydomain.access.log combined
</VirtualHost>

#NEW CONFIG STARTS HERE
<IfModule mod_ssl.c>
<VirtualHost *:443>
        ServerName mydomain.org

        ServerAdmin webmaster@localhost
        DocumentRoot /var/www/html

        ErrorLog ${APACHE_LOG_DIR}/mydomain.error.log
        CustomLog ${APACHE_LOG_DIR}/mydomain.access.log combined

	SSLEngine on
  #PATH TO YOUR CERTIFICATES (note: don't forget to replace mydomain.org with your actual domain name!)
	SSLCertificateFile /etc/letsencrypt/live/mydomain.org/fullchain.pem
	SSLCertificateKeyFile /etc/letsencrypt/live/mydomain.org/privkey.pem
</VirtualHost>
</IfModule>

In case you didn't notice, there is now an if statement that evaluates true in case a certain module is present. In this case, it evaluates to true if mod_ssl is present. Apache modules can be installed as following:

$ sudo a2enmod modulename

To verify which modules are already running on your server, type:

$ sudo apache2ctl -M

If the required ssl_module is not listed, run:

$ sudo a2enmod ssl

Time to restart Apache and load all of these changes!

index.html

At this point, when typing https://mydomain.org into your browser, you're greeted with a page that looks a little something like this:

Default apache on debian index.html page

If you cd into your /var/www/html folder, you will find this default index.html. As recommended by this page itself, you should edit this file before continuing operations on your webserver.
Open it on your favourite text editor and let's get started on a bare-bones "Hello Homebrew World"! webpage.

<!doctype html>

<html lang="en">
<head>
  <meta charset="utf-8">
  <title>My first homebrewed webpage</title>
</head>

<body>
  <h1>Hello Homebrew World!</h1>
</body>
</html>

Open your browser again and savour the fruits of your hard work.

That was it! Now you are ready to have hours of endless fun sailing the vast sea of HTML, CSS, JavaScript, etc.