homebrewserver.club/content/instant-messaging/server-support-for-audio-video-calls.md

Title: Prosody server support for A/V calls with Conversations 
Date: 2020-05-04
Tags: xmpp, chat, coturn, instant messaging, prosody, audio/video calls
Slug: server-support-for-audio-video-calls
Summary: Configure support for audio/video calls with Prosody,
Category: instant messaging
Status: draft

[TOC]

Introduction
---

In april 2020 Conversations [released a new version with support for end-to-end encrypted audio/video calls](https://github.com/iNPUTmice/Conversations/blob/master/CHANGELOG.md#version-280), bringing that functionality to one of the most widely used XMPP clients. For A/V calls to work you need to enable server-side support. This guide will help you doing that. 

We will first install and configure [Coturn](https://github.com/coturn/coturn). It is a libre STUN/TURN server that helps establish peer connections across firewalls for media streams such as calls. Then we will configure Prosody to talk to Coturn.

Like the other guides, this one assumes Debian stable running on the server, the fact that you will end up hosting a few of your friends and that you have some basic skills working on a linux command line.

Furthermore it assumes you have already installed and configured Prosody. If you haven't, take a look at our guide ['Configuring an XMPP server for secure, mobile instant messaging']({filename}configuring_an_xmpp_server_prosody_0.11.md) first.


Set up firewall 
----

To make your server communicate make sure following ports are open in your firewall for UDP traffic:

    :::console
    3478 (TURN)
    5349 (TURN + TLS)
	49152-65535 (UDP endpoints for clients)

Set up Coturn
---

First install Coturn

	:::console
	$ sudo apt-get update && sudo apt-get install coturn

After installing first make a backup of the existing configuration:

    :::console
    $ sudo mv /etc/turnserver.conf /etc/turnserver.conf.bak

Then download the configuration by [the homebrewserver.club](https://homebrewserver.club/downloads/turnserver.conf):

    :::console
    $ cd ~
    $ wget https://homebrewserver.club/downloads/turnserver.conf -O turnserver.conf
    
    
The file looks like this:

    :::c
    ## Minimal version of /etc/tunserver.conf 
    ## For more options and info see the original /etc/turnserver.conf.bak

    # Which porst to listen on, make sure the corresponding ports are accepting UDP connections on your firewall
    listening-port=3478
    tls-listening-port=5349

    # Your external IP, needed for some connections
    listening-ip=CUSTOMIZE THIS

    # Your domain name
    realm=myserver.org

    # Ports that client can connect to. Again make sure they are open for UDP connections on your firewall
    min-port=49152
    max-port=65535

    # For the connection with Prosody. Generate a long passphrase for the secret.
    use-auth-secret
    static-auth-secret=CUSTOMIZE THIS

    #Paths to Let's Encrypt certificates
    cert=/etc/letsencrypt/live/myserver.org/cert.pem
    pkey=/etc/letsencrypt/live/myserver.org/privkey.pem

    # Log to syslog
    syslog 

    # For security:
    # disallow server fingerprinting
    prod
    #dissalow connections on lo interface
    no-loopback-peers
    # disable command-line access 
    no-cli 
    

Now time for some config. You need to edit `/etc/tunserver.conf` in a few places.
 
First, add your external IP-address to `listening-ip`. If you don't know it, you can find out using the following command:

    :::console
    $ curl https://ifconfig.co

After that make sure `realm` points to the domain name of the server. 

Then, set `static-auth-secret` to a decently long passphrase. You can also generate one with:

    :::console
    $ openssl rand -base64 30 

Take note of it because we will need this secret later.

Finally, edit the paths to the Let's Encrypt certificates to whatever you've set in ['Configuring an XMPP server for secure, mobile instant messaging']({filename}configuring_an_xmpp_server_prosody_0.11.md#enabling-https).

Once you are done move it in to place:

    :::console
    $ sudo mv turnserver.conf /etc/turnserver.conf

Update & set up Prosody
---

First update your Prosody modules:

    :::console
    $ apt-get install mercurial
    $ cd /usr/src/prosody-modules
    $ hg pull
    $ hg update

Then edit your prosody config in `/etc/prosody/prosody.cfg.lua`:

First add `turncredentials` to the `modules_enabled` section.  

Then, before the 'Virtual Hosts' section add:

    :::console
    turncredentials_host = "myserver.org"
    turncredentials_secret="mydecentlylongpassphrase"

And replace the value of `turncredentials_secret` with the value of `static-auth-secret` in `/etc/turnserver.conf` and `turncredentials_host` with your domain name. 

Finishing up
---
Start `coturn` and enable it start on boot 

    :::console
    $ sudo systemctl enable --now coturn

Restart `prosody`

    :::console
    $ /etc/init.d/prosody restart

Finally to check if it works you can add check your server with the web-based [Conversations Compliance tester](https://compliance.conversations.im/) 

Thanks & Acknowledgements
---
Thanks to the [example config of Wiktor Kwapisiewicz](https://github.com/wiktor-k/coturn) and the [Prosody documentation](https://prosody.im/doc/coturn)